ACCESSORIES

ACCESSORIES are add-on tools that expand the usefulness of each tool.  Most of the Level Rite tools have accessories that may be purchased separate, depending on the need.

Standing (2 1/2") Seam Foot    $59.95 U.S. plus shipping. CA residents pay CA tax.

Standing (3 1/2") Seam Foot    $64.95 U.S. plus shipping. CA residents pay CA tax.

These three adjustable tools permit the extension arm of a Ladder Ridge Anchor or a Portable Tether/Ladder Roof Anchor to elevate (stand) over a 1 1/2" to a 3 1/2" metal standing seam. It also adjusts horizontally to spread the (black) feet wider to adapt to the project.   It can also be adjusted horizontally on the extension arm to shorten the length of the arm, when needed.  The tool may be converted to a Ladder Standoff (see below) when used with the Portable Tether/Ladder Roof Anchor - not the Ladder Ridge Anchor - with the addition of a 24" Standoff Bar (Sold separate. See below).

24" BAR FOR LADDER STANDOFF   $14.95 U.S. plus shipping. CA residents pay CA tax.

The Standing Seam Foot tools (above) may convert to a Ladder Standoff for a Portable Tether/LRA - not the Ladder Ridge Anchor - by removing the feet and the small horizontal bar.  The feet are then placed on the 24" bar (see above) and that bar is reattached to the Portable Tether/LRA.  The adjustable arm on the Portable Tether extends outward to hold the ladder away from a structure.  The (dangling) canvas web material is screwed in to the structure to reduce the chance of the ladder being displaced - and to conform to OSHA guidelines.

Clay Tile/Metal Roof Foot   $69.95 U.S. plus shipping. CA residents pay CA tax.

This add-on accessory elevates the adjustable arm on a Portable Tether/Ladder Roof Anchor or a Ladder Ridge Anchor over a Clay Tile. It adjusts horizontally so that the feet fit in to the valley of various size tiles.  The accessory elevates the adjustable arm over a 3 1/2" metal standing seam, and distributes the weight of the feet over a larger surface to reduce dents and scratches in the metal roofing.  This tool also helps the adjustable arm "reach" over the installed ridge cap (see below).

Roof Photos (3) compliments of David Mackey, Mackey Metal Roofing Co., Champlain, NY

   A TOOL TRAY (magnetized/non-magnetized) is available for use on the Portable Tether/Ladder Roof Anchor, the Ladder Ridge Anchor and the (small) Ladder Roof Anchor.  It is attached at the top of the tool near the Dial Plate, and keeps tools within reach when working on a roof.

TOOL TRAY (non-magnetized)  $64.95 U.S.  or TOOL TRAY (magnetized)  $74.95 U.S. 

plus shipping.  CA residents pay CA tax.

SWIVEL WHEELS $29.95 U.S. plus shipping. CA residents pay CA tax.

This accessory (two wheels & brackets per set) are bolted to the rails of a ladder to elevate the ladder over the installed roofing.  The rollers also make it easier to move a ladder as work progresses along the roof.

ADJUSTABLE ELEVATING LEGS  $44. 95 U.S.                         ELEVATING LEGS (NO BRACKETS)  $39.95 U.S.

plus shipping. CA residents pays CA tax.

This tool (two elevating legs with brackets) shown on a prop in the (left) photo attaches to the Portable Tether/Ladder Roof Anchor and raises the ladder (up to 3") to accomodate the tool reaching over an installed ridge cap.  Photo on the right (no brackets) shows elevating legs that raise the lower portion of a ladder to raise it (up to 3") over installed roofing.

LEVEL RITE LADDER SAFETY TOOLS are designed to put.............

SAFETY AT YOUR FEET

LEVEL RITE, LLC, 3120 Foothill Blvd., Oroville, CA 95966              Ph (530) 534-6000      e-mail  bgblehm@comcast.net    See Terms/policies